Does MSFS support DLSS?
Yes. Microsoft Flight Simulator 2020 added NVIDIA DLSS support in a 2022 sim update, together with DLSS Frame Generation for RTX 40-series cards and AMD FSR as an alternative upscaler. Frame generation in MSFS 2020 requires the DirectX 12 mode.
Microsoft Flight Simulator 2024 supports DLSS upscaling and frame generation from launch, along with AMD FSR. If you are unsure which version you are on, see what the newest Microsoft Flight Simulator is.
You’ll find the anti-aliasing / upscaling option in the sim’s graphics settings, usually alongside render scaling. Exact menu names differ slightly between 2020 and 2024 and between sim updates.
DLSS vs TAA: which is better?
Neither is better in every situation:
- TAA (temporal anti-aliasing) at 100% render scaling renders at native resolution. It usually gives the sharpest cockpit text and instrument displays, but it costs the most performance.
- DLSS renders at a lower internal resolution and uses AI upscaling to reconstruct the image. It typically gives a clear frame-rate gain when you are GPU-limited and often reduces shimmering on distant scenery and power lines. The trade-off can be softer or smeared glass-cockpit displays, especially in Performance modes.
- DLAA, where available, uses DLSS’s anti-aliasing at native resolution. It can look cleaner than TAA without the performance gain of upscaling.
A practical rule: if your GPU is struggling, especially at 1440p, 4K or in VR, try DLSS. If you are CPU-limited (see below), DLSS upscaling will do little for frame rate, and TAA or DLAA may look better.
Recommended DLSS settings
These are reasonable starting points, not fixed rules:
| Resolution | Suggested DLSS mode |
|---|---|
| 1080p | Quality, or DLAA/TAA if the GPU copes, since upscaling from very low resolutions gets soft |
| 1440p | Quality or Balanced |
| 4K | Balanced or Performance |
| VR | Varies by headset; start with Quality and adjust |
Avoid Ultra Performance except at very high output resolutions. It tends to blur cockpit text badly.
Frame generation
DLSS Frame Generation inserts generated frames between rendered ones. In MSFS it can make a large difference when the sim is CPU-bound, which is common at busy airports, because the extra frames don’t depend on the main simulation thread.
Things to know:
- It needs a supported NVIDIA card (RTX 40-series or newer).
- It works best when the base frame rate is already reasonably high, roughly in the 40s or above. At low base frame rates, input lag and artifacts are more noticeable.
- Generated frames can produce artifacts on fast-changing elements such as instrument text and UI.
- Support in VR has historically been limited, so check the current state for your version.
Glass cockpit ghosting and newer DLSS models
A common complaint is ghosting or smearing on glass-cockpit screens (PFDs, navigation displays and moving maps) when DLSS is on. Approaches users take include:
- Using a higher-quality DLSS mode or switching to DLAA
- Using NVIDIA’s driver-level DLSS override (in the NVIDIA App) to apply a newer DLSS model or preset than the one the sim ships with
- Community-made fixes distributed through add-on sites
Treat driver overrides and community fixes as experimental. Change one thing at a time, note what you changed, and undo it if it causes problems after a sim or driver update.
AMD and Intel cards
AMD and Intel GPU owners can use AMD FSR in MSFS. Results vary by FSR version and quality mode, and image quality is generally a little behind DLSS at the same internal resolution, but it can still deliver useful gains when GPU-limited.
How to display FPS in MSFS
The built-in way, in both MSFS 2020 and 2024, is through Developer Mode:
- Open the sim’s general options and find the Developers section.
- Turn Developer Mode on. A toolbar appears at the top of the screen.
- From the toolbar, use the Debug (or similar) menu to enable Display FPS.
The overlay shows your frame rate and, usefully, what is limiting it, such as the main thread or the GPU. Developer Mode adds menus you don’t need for normal flying, so switch it off when you’re done.
Alternatives that work without Developer Mode include the Steam overlay FPS counter, the NVIDIA App performance overlay, AMD Adrenalin’s overlay and Xbox Game Bar.
Is MSFS CPU or GPU heavy?
Both, depending on the moment:
- CPU / main-thread limited: busy airports, heavy AI or online traffic, dense photogrammetry cities and complex airliners with detailed avionics. Here, faster single-thread CPU performance matters most and DLSS upscaling helps little, though frame generation can.
- GPU limited: high resolution, VR, high cloud quality, high render scaling and high terrain detail at altitude.
Use the Developer Mode overlay in the situation that’s giving you trouble. Tuning blind often means lowering the wrong settings.
The settings that move performance most
If you need more frames, these settings usually have the biggest effect:
- Render scaling (GPU)
- Terrain level of detail (CPU and GPU)
- Object level of detail (CPU and GPU)
- Volumetric clouds (GPU)
- AI and online traffic density (CPU)
- Glass cockpit refresh rate (CPU, noticeable in airliners)
- Buildings and trees (both)
Reduce one at a time and retest the same flight. Locking the frame rate to a value your PC can hold consistently often feels smoother than an unlocked frame rate that swings widely.
Why does Microsoft Flight Simulator keep crashing?
The most common causes of MSFS crashes to desktop (CTDs) are:
- Third-party add-ons in the Community folder that are outdated or incompatible with a recent sim update
- Unstable hardware tuning: GPU or CPU overclocks, undervolts, or RAM profiles (XMP/EXPO) that pass other games but fail under long sim loads
- Running out of memory: too little RAM, a disabled or tiny Windows page file, or VRAM exhaustion at high settings
- Graphics driver problems, especially right after a driver or sim update
- Corrupted sim files or caches
- Overlays and background tools that hook into the game
- Server or streaming problems, which more often cause hangs, failed loads or missing scenery than outright crashes
Memory access violation errors (such as 0xc0000005) are generic. They don’t point to one cause, but they very often trace back to add-ons or unstable memory.
Fixing flight sim crashes, in order
Work from most likely and least invasive to least likely and most invasive:
- Empty the Community folder. Move its contents to a temporary folder (don’t delete them), then test. If the crash stops, add items back in small groups to find the culprit. Our guide to installing add-ons in the MSFS Community folder shows how to find the folder for your version and store.
- Remove overclocks and memory profiles. Return CPU, GPU and RAM to stock settings for testing.
- Clean-install your graphics driver. Download it from NVIDIA, AMD or Intel and choose the clean install option. If the crashes began after a driver update, try the previous version.
- Let Windows manage the page file. If you’ve disabled or shrunk it, set it back to system-managed, particularly with 16 GB of RAM or less.
- Disable overlays. Turn off third-party overlays, monitoring tools and RGB or tuning utilities you don’t need.
- Clear the rolling cache from the sim’s data settings if you see corrupted or missing scenery.
- Verify or repair the installation. On Steam, verify game files. In the Xbox app or Microsoft Store, use the repair option. MSFS may then re-check or re-download content.
- Unplug unneeded USB devices. A faulty or unusual controller can occasionally cause problems. Our overview of the controls in Microsoft Flight Simulator covers how to clear out stale bindings once you reconnect them.
- Check Event Viewer. Look under Windows Logs > Application for an error entry at the time of the crash. The “faulting module” name can hint at a driver, an add-on DLL or a system component.
For general Windows-level steps that apply to any game, see our guide on how to fix a game crash problem.
Xbox-specific crash steps
On Xbox Series X|S, you can’t touch a Community folder, so the options are simpler:
- Fully power-cycle the console (not just rest mode).
- Clear the game’s reserved space from the game’s Manage game and add-ons screen.
- Temporarily reduce or turn off traffic options and remove recently installed Marketplace content.
- As a last resort, uninstall and reinstall.
See how MSFS on Xbox differs from PC for more on what Xbox players can and can’t change.
When to report the crash
If the sim crashes with an empty Community folder, stock hardware settings and a fresh driver, the problem may be in the sim itself. Check the official Microsoft Flight Simulator forums for known issues after the latest update, and use the official support channels to file a report with your Event Viewer details and the steps that trigger the crash. Known bugs are often fixed in a later sim update or hotfix.