Sim Hardware

Building a Home Cockpit: Frames, Instrument Panels and Motion Rigs

Plan a flight sim home cockpit: choosing a frame, adding instrument and switch panels, building an Airbus A320 cockpit, projection, motion rigs and room setup.

On this page
  1. Decide What Kind of Cockpit You’re Building
  2. Cockpit Frames and Seats
  3. Instrument Panels and Switch Panels
  4. Building an Airbus A320 Home Cockpit
  5. Outside Visuals: Monitors, TVs and Projectors
  6. Motion Rigs
  7. Planning the Room
  8. A Staged Build Path

A home cockpit is where flight simulation turns into a building project. Some people add a sturdy frame and a few panels to a desk setup; others build a full-size Airbus or Boeing flight deck in a spare room. Whatever your goal, the same pieces come up: a frame to mount everything on, panels to replace mouse clicks, a way to see outside, and possibly motion. This guide covers each in turn.

Decide What Kind of Cockpit You’re Building

Before buying anything, decide on three things:

  1. Generic or aircraft-specific? A generic cockpit with a flexible frame lets you fly anything. A type-specific cockpit, such as an A320 or a 737, offers the most realism but commits you to one aircraft.
  2. Single seat or two seats? Airliner cockpits are designed for two pilots (and a shared cockpit session lets a friend fly the other seat), which doubles some hardware and needs much more space.
  3. How much space can you dedicate? A compact frame fits in a corner. A closed, full-size airliner shell needs a room.

Cockpit Frames and Seats

A frame gives your controls a rigid, consistent mounting point and puts you in a proper seated position, which a desk often can’t.

Folding and compact frames

Several companies sell ready-made flight sim seats and cockpits with mounting arms for a stick, throttle, yoke and pedals. Some also support racing wheels, so one rig can serve both hobbies. These are a good first step: affordable compared with custom builds, adjustable, and relatively easy to move.

Aluminum profile rigs

Extruded aluminum profile rigs, widely used in sim racing, can be configured for flying with side mounts for a HOTAS or a center mount for a stick. They are very stiff, highly adjustable, and accept add-on brackets for monitors, panels and keyboards. Many builders like them because the rig can grow with the setup.

Aircraft-specific shells

At the far end are open “shell frames” and fully closed shells that copy the dimensions of a real flight deck. Vendors of A320 and 737 cockpits often sell open frames first, which can later be extended with lining panels into a closed shell. Even a full-size open frame needs a large room, so check the vendor’s dimension drawings before ordering.

Instrument Panels and Switch Panels

Panels are what make a cockpit feel like a cockpit. You no longer reach for the mouse to change a radio frequency or flip a light switch.

Off-the-shelf panels

Common options for general aviation include:

  • Switch panels for lights, magnetos, master and avionics switches, and gear.
  • Radio and multi panels for COM/NAV frequencies, transponder and autopilot.
  • Small instrument displays, such as Logitech’s flight instrument panel, a compact screen that can show one of several gauges at a time.
  • G1000-style displays that recreate a glass cockpit with real bezel buttons and knobs. See our Garmin G1000 basics to learn the system first.
  • Aircraft-specific panels, for example a Cessna 172-style multi-instrument panel.

For airliners, popular modules include autopilot panels (an Airbus FCU or a Boeing MCP), EFIS panels, MCDU/CDU units with keypads and screens, and overhead panel sections.

Screens with pop-out instruments

A cheaper route is to put a monitor behind a cut-out panel and display the sim’s instruments on it. Microsoft Flight Simulator and X-Plane let you pop out some instrument windows, and tools such as Air Manager can draw gauges on extra screens or tablets. This gives a realistic look without buying a separate device for every instrument.

DIY panels

If you enjoy electronics, you can build your own panels using microcontrollers such as Arduino boards together with community software like MobiFlight, or commercial tools such as SPAD.next, to link switches, encoders and displays to the simulator. It takes time, but it costs far less than buying a ready-made unit for every panel.

Building an Airbus A320 Home Cockpit

The A320 family is one of the most popular airliners for home cockpits, helped by detailed simulator add-ons and a large hardware market. A typical A320 build includes:

  • Sidesticks and pedals: Airbus aircraft use a sidestick on each side rather than a yoke. A widely used entry point is the Thrustmaster TCA Sidestick Airbus Edition.
  • Thrust levers: an Airbus-style quadrant with the correct detents (idle, climb, FLX/MCT, TOGA). See our throttle quadrant guide.
  • Glareshield panels: an FCU (flight control unit) and EFIS panels for the autopilot and displays.
  • Pedestal: MCDUs, radio management panels, engine master switches and the parking brake.
  • Overhead panel: electrical, fuel, hydraulics, lighting and anti-ice, often added last because it is large and expensive.
  • Displays: screens behind the main instrument panel for the primary flight, navigation and engine displays.
  • Software: a detailed A320 add-on in your simulator, or a standalone systems package designed for cockpit builders, such as ProSim-AR, which drives the cockpit hardware while the sim renders the outside world.

Complete A320 builds often use two computers: one powerful machine for the outside view and a second for the cockpit displays. Start with the controls and the FCU, then add the pedestal and overhead over time.

Outside Visuals: Monitors, TVs and Projectors

How you see outside shapes the whole layout:

  • A single large monitor or TV: simplest for small cockpits.
  • Three screens: wrap around the cockpit for a much wider view. Avoid two screens side by side, because the join ends up in the middle of your view. See setting up triple monitors for flight simulation.
  • Projectors on a curved screen: the most immersive option for enclosed cockpits. Multi-projector setups need warping and edge-blending software, and projectors should be mounted to the ceiling rather than the cockpit, so they don’t shake when you move.
  • VR: removes the need for outside screens entirely, but you can’t see your physical panels without mixed-reality features. See choosing a VR headset for Microsoft Flight Simulator.

Motion Rigs

How motion simulation works

A motion rig moves your seat, or your whole cockpit, to give physical cues. It cannot reproduce sustained forces: a real aircraft in a steady turn presses you into your seat for as long as the turn lasts, but a rig can only tilt and move a short distance. Instead, motion software uses short onset cues, such as a brief tilt or jolt as you rotate or touch down, then slowly returns to neutral. Done well, this tricks your inner ear convincingly. Done badly, it can feel wrong or cause discomfort.

Degrees of freedom

Motion rigs are described by their degrees of freedom (DOF):

  • 2DOF: usually pitch and roll. The most common entry point.
  • 3DOF: adds yaw, or heave (up and down movement).
  • 6DOF: pitch, roll, yaw, heave, surge (forward and back) and sway (side to side), typically on a platform with six actuators. Closest to professional simulators, and by far the most expensive.

Rigs are driven by vendor software or by community tools that read telemetry from the sim. Check simulator compatibility before buying.

Tactile transducers as an alternative

A cheaper way to feel the aircraft is a tactile transducer, sometimes called a “bass shaker”, bolted to the seat or frame. Driven by the sim’s audio or by dedicated telemetry software, it lets you feel engine vibration, runway bumps and touchdown. Many builders consider this good value compared with full motion.

Safety

Motion rigs move people and heavy equipment. Follow the manufacturer’s weight limits, keep pinch points guarded, make sure there is space around the rig, keep children and pets away while it is running, and use the emergency stop if one is provided. Have electrical work for high-power equipment checked by a qualified electrician.

Planning the Room

Points that cockpit builders often learn the hard way:

  • Heat: a powerful PC, several screens, projectors and a person in a closed shell generate a lot of heat. Plan for ventilation or air conditioning.
  • Access: leave room to enter the cockpit, and room behind and in front for maintenance and cabling.
  • Light and walls: matte, dark walls reduce reflections from projectors and screens. Daylight from windows can wash out projections.
  • Cabling: use quality and, where needed, powered USB hubs and active extension cables. Label everything.
  • Power: add up the power draw of computers, screens and projectors, and consult an electrician if you are unsure what a circuit can handle.

A Staged Build Path

You don’t need to build everything at once. A practical progression:

  1. Desk setup: primary controls, rudder pedals and a throttle. Our guide to building your sim hardware setup covers this stage.
  2. Frame or seat: move everything to a rigid rig with a consistent seating position.
  3. Key panels: add the panels you use on every flight, usually autopilot and radios.
  4. Better visuals: triple screens, a projector or VR.
  5. Aircraft-specific hardware: pedestal, overhead and type-specific displays.
  6. Motion or tactile feedback: once everything else is stable and working.

Building gradually spreads the cost and lets you learn which pieces genuinely improve your flying before you commit to the expensive ones.

The complete guide to sim hardware

Best Flight Simulator Hardware: Building Your Sim Setup
Read the guide

Keep exploring

Guides from other topics

All topics →