A HOTAS, short for “hands-on throttle and stick”, puts the flight stick under one hand and the throttle under the other, with the most-used switches built into both. It is the standard setup for combat flight sims and a flexible choice for civil flying too. This guide covers how to pick one, how to set it up properly, and how to configure a MOZA force feedback base, which works a little differently from a conventional stick.
If you want the background first, see our explainer on what a HOTAS controller is.
What a HOTAS Gives You
Compared with a keyboard, a gamepad or a basic joystick, a HOTAS offers:
- Proportional control of pitch, roll and power rather than on/off key presses.
- A dedicated throttle lever that stays where you leave it, so power settings are repeatable.
- Lots of buttons and hat switches within reach, which reduces the need to look away for the keyboard.
- Twist or rocker rudder control on many models, which is useful until you add rudder pedals.
Does Microsoft Flight Simulator Support HOTAS?
Yes. Microsoft Flight Simulator recognizes most USB HOTAS devices on Windows and includes preset profiles for many popular models. On Xbox, only controllers that are listed as Xbox-compatible will work, so check the packaging or the manufacturer’s site before buying. X-Plane, DCS World and Prepar3D also support standard USB HOTAS devices; see our comparison of flight simulator software for PC.
How to Choose a HOTAS
Integrated or separate throttle
Entry-level units often have a throttle that detaches from the stick base but connects to it with a short cable. That keeps cost down and works fine on a desk. More advanced systems use a fully separate throttle with its own USB connection, which gives more freedom in where you place it, including on side mounts or a cockpit frame.
Sensors and precision
Many budget sticks use potentiometers, which can wear and develop jitter over time. Hall effect and other contactless magnetic sensors are increasingly common and are generally considered more durable and consistent. Sensor resolution matters less than smooth, consistent centering, so read owner reviews for comments on “stiction” (a sticky center) and drift.
Buttons, hats and axes
Count what you will actually use. A civil flyer may need trim, view controls, flaps, gear and brakes. A DCS pilot may want dozens of functions across multiple hats, switches and rotary axes. Extra axes are handy for mixture, propeller, zoom or radar elevation.
Grip size and ergonomics
Grips vary a lot in size and shape. Large grips can be tiring for smaller hands, and some throttles place buttons that are hard to reach. If possible, try a unit in person, or check whether the stick has adjustable hand rests.
Software and platform support
Some brands provide programming software for macros, curves and profiles. That can be powerful, but it can also conflict with in-sim settings. Also confirm Xbox support if you fly on console.
HOTAS Options by Tier
Product lines change, so treat this as a guide to what each tier usually offers rather than a fixed buying list.
| Tier | Typical examples | What you usually get |
|---|---|---|
| Entry | Thrustmaster T.Flight HOTAS X / HOTAS One / HOTAS 4 | Detachable throttle, twist rudder, modest button count, low cost |
| Entry–mid | Thrustmaster T.16000M FCS HOTAS, Logitech G X56 | Better sensors or more controls, separate throttle |
| Mid–high | VKB, Virpil, Winwing, Thrustmaster Warthog | Metal construction, modular grips, high-quality gimbals |
| Force feedback | MOZA flight bases, other FFB sticks | Motorized base that pushes back based on airspeed and trim |
For civil and airliner flying, you might prefer a yoke or an airliner-style throttle instead. See the best flight simulator controls for PC and our throttle quadrant guide.
Setting Up Any HOTAS
Mounting
A HOTAS that slides around the desk is hard to fly precisely. Rubber feet are fine to start, but many simmers move to clamp-on desk mounts or chair-mounted arms that place the stick and throttle beside their thighs, similar to a fighter cockpit. Keep your forearm supported so small inputs come from the wrist.
Drivers, firmware and calibration
- Install any drivers or software the manufacturer recommends, and update the firmware.
- Open the Windows game controller panel (search “Set up USB game controllers”) and confirm every axis moves through its full range and centers correctly.
- Run any calibration the manufacturer provides. Calibrate once, in one place, rather than layering several calibrations on top of each other.
Binding axes and buttons in the sim
In Microsoft Flight Simulator, open the Controls menu, select your device, and either start from the built-in preset or create a copy you can edit. Check that pitch, roll, rudder and throttle are on the correct axes and that none are inverted. Then bind the functions you use most: trim, flaps, gear, brakes, views and autopilot disconnect. Our overview of the controls in Microsoft Flight Simulator explains how the menu is organized.
Save separate profiles if you fly very different aircraft. A combat profile and an airliner profile rarely use the same buttons.
Tuning response
Many sticks feel twitchy around the center out of the box. Adding a gentle response curve and a small dead zone usually helps. Our guide to setting joystick sensitivity curves and dead zones in MSFS walks through each setting.
MOZA Flight Sim Setup (Force Feedback Bases)
MOZA’s flight products use motorized bases, so setup involves extra steps for power and force feedback. The general process, based on MOZA’s own guidance:
- Install MOZA Cockpit first. Download the MOZA Cockpit software from MOZA’s support site and install it before connecting the hardware, which helps avoid driver conflicts.
- Mount the base securely. Use the included desk clamp, a cockpit mount or a baseplate adapter. A force feedback base can push hard, so a firm mount matters more than with a passive stick.
- Attach the grip or yoke. Fit it to the quick-release and make sure it locks fully.
- Connect power, then USB. Plug the base into its power adapter, then connect it to the PC.
- Let it self-calibrate. When powered on, the base moves through its range on its own. Keep your hands clear and let it finish.
- Check the device in MOZA Cockpit. A device shown in color is connected. If it isn’t recognized, check the USB cable and power. Update firmware if prompted.
- Configure the simulator. MOZA Cockpit lists supported games. From the game list you can set up telemetry force feedback, and MOZA states that recent versions can configure DCS and Microsoft Flight Simulator automatically. If automatic setup fails, the manual route is to point MOZA Cockpit at the game’s install folder and run its setup script.
- Use automatic button binding if you are new. MOZA’s Keybind Manager can apply ready-made bindings for the aircraft profiles you select, so you can start flying without building a profile from scratch.
- Tune force feedback. Adjust overall strength, damping and centering spring to taste. Start soft. Very strong forces are tiring and can make small corrections harder.
Because the steps and software change with updates, check MOZA’s current support pages if anything looks different on your screen.
Troubleshooting Common HOTAS Problems
- Aircraft drifts or won’t hold level: check that no axis is bound twice (for example, the stick and a gamepad both on pitch), and that trim isn’t bound to a noisy axis.
- Throttle jumps or won’t reach idle: recalibrate in Windows or the vendor software, and check for an extremity dead zone in the sim.
- Buttons do the wrong thing: the sim may have loaded the default preset again. Confirm the correct profile is active.
- Device disappears mid-flight: use a powered USB hub or a different port, and disable USB power saving in Windows.
- Twist rudder fights your pedals: unbind the twist axis once you add pedals.