The short answer
The main Concorde for Microsoft Flight Simulator is the DC Designs Concorde, sold through Just Flight and available for MSFS 2020 and MSFS 2024. It’s a fully native MSFS aircraft with a detailed flight deck, a working fuel transfer and centre-of-gravity system, and a flight model that only reaches Mach 2 at around 60,000 feet if you fly it correctly. It’s designed to be easier than the most complex study-level airliners, while still challenging if you want it to be.
Concorde add-ons by simulator
- Microsoft Flight Simulator 2020 and 2024: the DC Designs Concorde, sold through Just Flight and other stores. Check the store for platform availability and the current version.
- X-Plane: Concorde add-ons have been made for X-Plane over the years. Check current X-Plane 12 compatibility before buying.
- Older simulators: FSX and Prepar3D had several Concorde add-ons, some very detailed. They won’t work in MSFS.
DC Designs Concorde for MSFS: what you get
From the developer’s published details:
- A native MSFS build using the sim’s own animation and aerodynamics systems, including rain effects, reflective glass and the “modern” flight model.
- A truly 3D flight deck with almost every switch, dial and gauge from the real aircraft, including the flight engineer’s station.
- A detailed fuel system. The developer describes modelling Concorde’s tanks, pumps, valves and fuel lines and connecting them to the engineer’s panel. There’s also an automated fuel transfer option if you’d rather not manage it yourself.
- Navigation: weather radar and a working flight management computer. The developer said a CIVA INS would follow once Xbox could support the required gauges.
- Autopilot modes, including max climb and max cruise, with ILS approaches supported.
- Visual effects such as reheat flames, vapour and engine smoke.
- A forward passenger cabin you can walk through, plus ground crew interaction.
- Liveries: British Airways (two eras), Air France and the Singapore Airlines/BA G-BOAD scheme.
- VR support and an included operations manual.
According to the developer, airline pilots tested it before release, and it can cross the Atlantic with fuel burn close to the real aircraft.
How Concorde flies differently
The droop nose and visor. Concorde’s nose lowers to give the pilots a view of the runway at its high-angle takeoff and landing attitudes. It’s typically partly lowered for taxi and takeoff, lowered further for landing, and raised with the visor up for supersonic cruise.
Reheat (afterburners). Concorde used reheat for takeoff and to accelerate through the transonic range toward supersonic speed. It then cruised supersonic without reheat, which is called supercruise.
Centre-of-gravity management. As Concorde accelerates through Mach 1, the centre of lift moves aft. Fuel is pumped toward the rear trim tank to move the centre of gravity aft to match, then pumped forward again before deceleration. This is why the fuel system matters so much. In the DC Designs aircraft you can do it manually from the engineer’s panel or let the automated system handle it.
Big speed changes take big distances. Climbing to around 60,000 feet, cruising at Mach 2 and slowing down again all need careful planning. Start the deceleration and descent a long way out.
A basic Concorde flight, phase by phase
- Plan a sensible first route. A transatlantic flight such as London to New York is the classic, but a shorter flight over the sea is a good first try.
- Load fuel and set up the CG using the aircraft’s loading tools or manual. Start with the automated fuel system if you’re new.
- Taxi with the nose lowered for visibility.
- Take off with reheat, following the speeds in the manual for your weight, then cancel reheat after the initial climb as the procedure describes.
- Climb subsonic, then transition to the supersonic acceleration: reheat on, fuel moving aft, nose and visor up.
- Supercruise at Mach 2 in the high 50,000s to 60,000 feet, with reheat off.
- Decelerate early. Reduce power, move fuel forward and come back through Mach 1 well before your destination.
- Approach and land with the nose lowered for visibility, at a high nose-up attitude. Follow the manual’s approach speeds.
Treat these as an outline. The DC Designs operations manual gives the specific speeds, settings and limits.
Tips and common mistakes
- Read the manual first. Concorde doesn’t behave like a modern airliner, and guessing leads to frustration.
- Don’t skip the CG transfer. If you fly supersonic without moving fuel aft, trim and handling will feel wrong.
- Watch fuel closely. Concorde was designed with tight transatlantic fuel margins. Inefficient climbs or late decelerations can leave you short.
- Expect high workload on approach. It’s fast, nose-high and sensitive. Practise a few approaches without the full transatlantic flight first.
- Use a throttle quadrant if you can. Four engines plus reheat are fiddly with a keyboard.
Concorde’s history in flight simulation
Concorde has a long history in Microsoft’s simulator. It was a default aircraft in Flight Simulator 2000, alongside the 737-400 and 777-300, before disappearing from the default hangar in later versions. Since then it has been an add-on, and the DC Designs version brings it to the modern MSFS platform.
If you love classic jets, see our widebody airliner add-ons guide, which includes the classic flight-engineer A300B4. For other famous aircraft you can fly, see our guide to flying the Boeing 747 and the flight sim aircraft hub.