What SIDs and STARs are
A SID (standard instrument departure) is a published route from a runway to the en route part of a flight. A STAR (standard terminal arrival route) is a published route from the en route structure toward the destination airport, usually ending where an instrument approach or radar vectors begin.
Both exist to keep traffic flowing predictably at busy airports. Instead of reading out a long series of headings and altitudes, a controller can clear you for a named procedure, and every aircraft on that procedure flies the same path with the same restrictions.
In a flight simulator, SIDs and STARs matter most when you fly IFR, especially on online networks such as VATSIM and IVAO where controllers expect you to fly them correctly. Even offline, flying the published procedures makes flights more realistic and helps you plan your climb and descent.
Where to get charts for sim flying
- National aeronautical publications. Many countries publish their charts free online in their AIP (aeronautical information publication). In the US, the FAA publishes its terminal procedures, including SIDs and STARs, for free.
- Navigraph Charts. A subscription service with worldwide charts that many simmers use, often integrated into planners and add-on aircraft tablets.
- Community chart tools. Some free sites collect official charts from various countries in one place.
- In-sim EFBs. Some sims and add-on aircraft display charts on their tablets, sometimes requiring a linked subscription.
Whatever the source, check the chart’s effective date. Procedures change, and your chart should match the navigation data in your sim and planner as closely as possible.
Parts of a SID chart
Layouts differ between chart publishers (for example, government charts versus Jeppesen-style charts), but most SID charts contain the same elements:
- Header. The procedure name and number, the airport, which runways it applies to, and often the chart’s effective date. Some headers also list frequencies, the transition altitude and an initial climb clearance.
- Communications. Departure control and other frequencies you’ll need.
- Plan view. The main drawing: runways, route lines, fixes, navaids, headings or tracks, distances, and altitude and speed restrictions at specific points.
- Route description. A text version of the procedure, often split by runway. When the drawing is busy, the text is the clearest way to understand exactly what to fly.
- Transitions. Named routes that connect the end of the SID to different en route paths.
- Notes. Climb gradient requirements, equipment requirements (such as GPS or RNAV), lost communications procedures and other restrictions.
On many US SIDs, the chart tells you an initial altitude to climb to and that you should expect clearance to a higher altitude a set time after departure. Charts from other countries may instead show a stop altitude directly on the chart or in the header.
Reading altitude and speed restrictions
Restrictions at a fix are the details sim pilots most often get wrong. On US government charts, the line notation works like this:
| Notation | Meaning |
|---|---|
| Altitude with a line underneath (e.g. 5000 underlined) | Cross at or above 5,000 feet |
| Altitude with a line above (e.g. 9000 overlined) | Cross at or below 9,000 feet |
| Altitude with lines above and below | Cross at exactly that altitude |
| Two altitudes, one overlined and one underlined | Cross between the two (an altitude window) |
| Speed such as 210K | Speed restriction in knots at that fix; the chart may mark it as a maximum (for example with MAX) |
Other chart publishers may write restrictions in text or use slightly different symbols, so check the chart’s legend if you’re unsure. When an FMC shows restrictions, it usually marks them with letters or symbols, such as A for at or above and B for at or below, though this varies by aircraft.
Climb gradients
Some SIDs require a minimum climb gradient, usually given in feet per nautical mile, to clear terrain or obstacles. Your aircraft’s climb rate in feet per minute depends on groundspeed, so you need to convert:
Required climb rate (ft/min) = gradient (ft/NM) × groundspeed (knots) ÷ 60
For example, a 400 ft/NM gradient at 180 knots groundspeed needs about 1,200 feet per minute. Some charts include a conversion table. If a heavy aircraft or a hot day means you can’t meet the gradient, pick a different procedure or runway.
Vector SIDs, pilot nav SIDs and ODPs
Not every departure is flown the same way:
- Pilot nav SIDs are flown on your own navigation along the charted route, usually through the FMC or GPS.
- Vector SIDs give an initial heading and altitude, after which ATC issues radar vectors to join the route or a fix. Following the chart only gets you so far; you then wait for ATC instructions.
- Obstacle departure procedures (ODPs) are designed for terrain and obstacle clearance rather than traffic flow. In the US, they’re often published as text, not a drawing, and you may fly them without being specifically cleared for them when no SID or vectors are assigned.
In the sim, vector SIDs can be confusing if you’re flying offline. If there’s no controller, many simmers fly the initial heading and altitude, then go direct to the first en route fix.
Reading a STAR chart
STARs share most of a SID’s layout, but read in the opposite direction:
- En route transitions feed in from different directions and join the common route.
- Altitude and speed restrictions are often heavier on STARs, because they’re used to sequence arriving traffic. Plan your descent around these restrictions, not just the airport elevation. Our guide to calculating top of descent shows how.
- Holding patterns are sometimes drawn at a fix along the STAR for when traffic or weather delays the arrival.
- Runway transitions may split the end of the STAR depending on the landing runway.
- The ending is usually a fix where you either join an instrument approach, expect radar vectors, or hold. The chart or its notes tell you what to expect.
In the US, controllers may clear you to “descend via” a STAR, which means following its published altitude and speed restrictions as you go. Other countries use different phrasing; see VATSIM radio phraseology for beginners.
Procedure names and how they appear in the FMC
Procedures are usually named after a fix or place, followed by a number that changes each time the procedure is revised. In the FMC or flight plan, the name is shortened: a US procedure called “ALPHA TWO” (a made-up example) would typically show as ALPHA2. Many European procedures use a code made of the fix name, a number and a letter, such as ALPHA1A, where the letter often distinguishes the runway or route.
When a planner like SimBrief gives you a route, the first and last items after the airports are often the SID and STAR names, with a transition. Our guide to importing a SimBrief flight plan into MSFS explains how those carry into the sim.
Checking the chart against your FMC or GPS
After you load the procedure in the aircraft’s avionics, compare it with the chart:
- Is it the right procedure, runway and transition?
- Do the fixes appear in the same order?
- Are the altitude and speed restrictions the same?
- Are any discontinuities (gaps in the route) expected, such as after a vector segment?
- Does the chart date roughly match your navdata cycle?
Mismatches usually come from different navdata cycles or from a planner choosing a different runway than the one in use. Our flight planning software guide explains how AIRAC cycles work.
A step-by-step routine for each flight
- Check the weather and likely runway at departure and destination.
- Pick the SID and STAR that match those runways and your route.
- Read each chart fully, including the text description and notes.
- Note the initial or stop altitude on the SID, and any climb gradient.
- Note STAR restrictions and where it ends.
- Load both in the FMC or GPS and compare them line by line with the charts.
- Brief yourself before takeoff and again before top of descent.
For where SIDs and STARs fit into the bigger picture, see how to create a flight plan and the 7 phases of flight.