Flight Planning

What are the 7 phases of flight?

The 7 phases of flight are preflight, taxi, takeoff, climb, cruise, descent and approach, and landing. Here's what happens in each and how they map to a flight plan.

On this page
  1. The 7 phases of flight
  2. Is there an official list?
  3. Each phase in more detail
  4. Which phases are considered most critical
  5. How the phases map onto a flight plan
  6. Practicing the phases in a simulator

The 7 phases of flight

A typical flight is usually described in seven phases:

  1. Preflight – planning, weather and fuel checks, inspection and setup.
  2. Taxi – moving from the gate or parking spot to the runway (including pushback for airliners).
  3. Takeoff – the takeoff roll, rotation and lift-off.
  4. Climb – climbing from the runway to cruise altitude.
  5. Cruise – the level, en route part of the flight.
  6. Descent and approach – leaving cruise altitude and setting up to land on a specific runway.
  7. Landing and shutdown – touchdown, rollout, taxi to parking and engine shutdown.

Each phase has its own tasks, checklists and risks. Thinking about a flight this way makes it easier to plan, brief and fly, whether you’re in a real cockpit or a simulator.

Is there an official list?

Not exactly. The seven-phase breakdown is a common way of teaching and talking about flights, and different sources group the phases slightly differently. Some list descent and approach separately, or treat initial climb as its own phase.

Safety organizations use more detailed lists for accident and incident reporting. The US National Transportation Safety Board, for example, publishes phase of flight definitions that split a flight into finer stages, such as standing, pushback, taxi, takeoff, initial climb, en route, maneuvering, approach and landing, each with sub-phases. Those detailed lists exist so investigators can be precise; the seven-phase version is easier to remember.

Each phase in more detail

1. Preflight

Preflight covers everything before the aircraft moves: checking weather and NOTAMs, planning the route and fuel, calculating weight and balance, inspecting the aircraft, and briefing the crew. In a simulator, this is where you build your flight plan, load fuel and payload, and set up the avionics. Our guide on how to create a flight plan covers the planning side, and the fuel calculator guide covers fuel.

2. Taxi

The aircraft moves under its own power (after a pushback from the gate for airliners) to the departure runway. Pilots follow taxi instructions from ground control, run checklists and complete engine run-ups or before-takeoff checks. In a sim, it’s a good time to confirm your departure procedure and the first altitude you’ve been cleared to.

3. Takeoff

The aircraft lines up, applies takeoff power and accelerates. At rotation speed, the pilot raises the nose and the aircraft lifts off. Landing gear and, later, flaps are retracted as it climbs away. Takeoff is short but busy, and decisions such as whether to reject a takeoff have to be made quickly.

4. Climb

The aircraft climbs to its cruise altitude, often following a standard instrument departure (SID) for the first part of the route. Pilots manage pitch, power and speed, and follow any altitude or speed restrictions. Our guide to reading SID and STAR charts explains those restrictions.

5. Cruise

The aircraft levels off and follows the en route part of the flight plan. For airliners this is usually the longest phase. Pilots monitor fuel, navigation, weather and systems, and prepare for the descent and arrival.

6. Descent and approach

The aircraft leaves cruise altitude at the top of descent, often follows a standard terminal arrival route (STAR), and then flies an approach to a specific runway, either visually or using an instrument approach such as an ILS. Speed comes back, and flaps and landing gear go down. Planning when to start down is a skill in itself; see how to calculate top of descent.

7. Landing and shutdown

The aircraft crosses the runway threshold, flares and touches down, then slows using brakes, spoilers and, on many jets, reverse thrust. It taxis to the gate or parking, and the crew shuts down the engines and completes post-flight checks.

Which phases are considered most critical

Takeoff and the initial climb, and approach and landing, are widely regarded as the most demanding phases. The aircraft is close to the ground, speeds are changing, workload is high and there’s less time to fix mistakes. Accident data has historically shown a large share of accidents happening in these phases despite their short duration.

That’s why many operators apply a “sterile cockpit” practice during critical phases, limiting conversation and tasks to what’s needed for the flight. In the US, a version of this applies to airline crews below 10,000 feet, except in cruise.

How the phases map onto a flight plan

A flight plan is organized around the same phases:

Phase Typical flight plan element
Preflight Route, altitude, fuel, alternate, weather briefing
Taxi Departure gate or parking, departure runway
Takeoff and climb SID or departure procedure, initial altitude
Cruise En route waypoints and airways, cruise altitude
Descent Top of descent, STAR
Approach and landing Approach procedure, landing runway, destination gate

When you build a route in a planner or a sim’s flight plan screen, you’re effectively describing each of these phases in advance. Our flight planning software guide compares the tools that do this.

Practicing the phases in a simulator

  • Fly each phase on purpose. Treat your next sim flight as seven separate jobs, each with its own checklist.
  • Use pause wisely. Pausing before top of descent to brief the arrival is a useful habit while learning.
  • Practice the critical phases. Repeating takeoffs and landings at one airport in a traffic pattern, or starting in the air on final approach, builds skill in the phases that matter most.
  • Start simple. Browser sims like GeoFS let you practice the structure of a flight with a basic flight plan; see our GeoFS flight plan guide.

The complete guide to flight planning

Flight Planning Software for Flight Simulators
Read the guide

Keep exploring

Guides from other topics

All topics →