Flight Planning

How to Use the MSFS 2024 Flight Planner

Build a route in the MSFS 2024 EFB, send it to the avionics, file it with ATC and get the autopilot to follow it, plus fixes for common flight plan problems.

On this page
  1. Where flight planning lives in MSFS 2024
  2. Building a flight plan in the EFB
  3. Sending the plan to the avionics and filing with ATC
  4. Other ways to get a plan into the EFB
  5. Following the plan with the autopilot
  6. Third-party aircraft that ignore the EFB route
  7. Troubleshooting common problems

Where flight planning lives in MSFS 2024

Microsoft Flight Simulator 2024 changed how flight planning works compared with MSFS 2020. In 2020, most people built a route on the world map before loading into the aircraft, and the sim pushed it into the avionics automatically. In 2024, most planning has moved into the electronic flight bag (EFB), a tablet-style app you can open from the world map before a flight or from the toolbar once you’re in the cockpit.

That change confuses a lot of players at first. The most common complaint on the official forums is “I made a flight plan but the aircraft won’t follow it.” The answer is usually that the plan was built but never sent to the avionics.

Menus and labels can shift between sim updates, so treat the steps below as a guide to the workflow rather than an exact list of button names.

Building a flight plan in the EFB

  1. Start a Free Flight and pick your aircraft, departure airport and starting position (gate, parking spot or runway).
  2. Open the EFB. Before the flight it’s available from the world map; in the cockpit, open it from the toolbar at the top of the screen. Many aircraft also have a tablet modeled in the cockpit.
  3. Open the flight planning app and go to the route page.
  4. Set departure and arrival. Enter the airports by ICAO code (for example KSEA or EGLL). If your aircraft supports it, you can choose departure and arrival runways and procedures.
  5. Choose a route type. For a VFR flight you can go direct or add your own waypoints. For IFR, let the planner build a route along airways, or enter waypoints yourself.
  6. Set a cruise altitude that suits the aircraft and the distance. A short hop in a Cessna won’t need the same altitude as an airliner crossing a continent.
  7. Review the route on the map. Check for odd detours or waypoints in the wrong place before going further.

If you’re new to route building, our guide on how to create a flight plan explains the decisions behind each of these steps.

Sending the plan to the avionics and filing with ATC

A finished route in the EFB doesn’t do anything on its own. Two actions at the bottom of the route page matter:

  • Send to avionics – transfers the route to the aircraft’s GPS or flight management system. Without this, the G1000, GTN or FMC stays empty and you’ll have to enter the route by hand.
  • File with ATC – registers the plan with the sim’s built-in air traffic control, so ATC clearances and instructions match your route.

You can do both before departure, and you can send an updated route again while airborne if you change your plans.

Other ways to get a plan into the EFB

The online Flight Planner website

Microsoft runs an online flight planner on the official Flight Simulator website. You sign in with the same Microsoft or Xbox account you use in the sim, build and save a route in your browser, and it then appears in the EFB. In the sim, go to the route page, choose the option to load a flight plan and pick your saved route. This is handy if you want to plan on a laptop or phone away from your sim PC or Xbox.

Importing a SimBrief plan

The EFB includes an option to import a plan from SimBrief once you’ve linked your SimBrief account. This brings across the route and, depending on the aircraft, fuel and weights from your briefing. See our guide on how to import a SimBrief flight plan into MSFS for the full process and the alternatives if the direct import doesn’t work for your setup.

Loading a .pln file

MSFS uses the .pln format. Most external planners, including SimBrief and Little Navmap, can export one. In the EFB, use the import option on the route page and point it at the file. Saving a plan from the EFB to your PC is also possible; users report the file usually lands in their Downloads folder.

Following the plan with the autopilot

Once the route is in the avionics, getting the aircraft to fly it depends on the cockpit.

Glass cockpit light aircraft (G1000, G3000, GTN-equipped):

  1. Press the FPL button on the GPS or display to confirm the route is loaded.
  2. Make sure the navigation source is set to GPS (often shown as GPS on the CDI or HSI, toggled with a CDI button).
  3. Engage the autopilot and select NAV mode. The aircraft will turn toward the active waypoint.
  4. Manage altitude separately with ALT, VS or FLC modes unless the aircraft offers vertical navigation.

Airliners with an FMC or MCDU:

  1. Check the route pages in the FMC to confirm the waypoints arrived.
  2. Complete the rest of the FMC setup the aircraft needs (performance data, weights, speeds).
  3. After takeoff, engage LNAV (Boeing-style) or managed lateral navigation (Airbus-style) to follow the route. For vertical guidance, use VNAV or managed descent where the aircraft supports it.

Knowing roughly when to start down helps even with automation; our guide to calculating top of descent with the 3-to-1 rule explains the mental math.

Third-party aircraft that ignore the EFB route

Some detailed add-on aircraft don’t accept routes from the sim’s EFB at all. Players have reported this with the iniBuilds A320neo, for example, where a route sent to the avionics never appears in the MCDU, and the community has described it as a design choice rather than a bug. These aircraft usually expect you to:

  • type the route into the MCDU or FMC yourself, or
  • use the aircraft’s own EFB or tablet, which may have its own SimBrief import.

If a particular aircraft won’t take your route, check its manual or the developer’s support pages before assuming something is broken.

Troubleshooting common problems

  • The route doesn’t appear in the GPS or FMC. Go back to the EFB route page and use Send to avionics. If the aircraft is a third-party model, see the section above.
  • The autopilot won’t follow the route. Check that the navigation source is GPS (not VOR/LOC) and that NAV or LNAV mode is armed or active, not just HDG.
  • ATC gives instructions that don’t match the route. File the plan with ATC after your final edits, so the sim’s ATC has the latest version.
  • Waypoints are missing or renamed. Plans made with a newer or older navigation data cycle than your sim can reference waypoints that don’t exist in your install. Try rebuilding the route in the EFB, or update your navdata. Our flight planning software guide explains AIRAC cycles.
  • Procedures disappear after import. SIDs, STARs and approaches don’t always carry over from external files. Re-select them in the EFB or the aircraft’s avionics.

The complete guide to flight planning

Flight Planning Software for Flight Simulators
Read the guide

Keep exploring

Guides from other topics

All topics →