The Short Answer
A flight director (FD) is an avionics system that calculates the pitch and bank needed to follow a selected flight path, then displays that guidance as steering cues on the attitude indicator or primary flight display. The pilot, or the autopilot, follows the cues. The flight director doesn’t move any controls itself. It tells you where to put the nose and wings.
How a Flight Director Works
The flight director computer takes in:
- what you’ve asked for: a heading, a navigation course, an altitude, a vertical speed, an approach
- where the aircraft is and how it’s moving: airspeed and altitude from the air data system, attitude from the gyros or inertial sensors, and position from the navigation receivers or flight management system
From these it works out the attitude needed to reach the target smoothly and displays that as a command. If you need to turn right and climb, the cue moves up and to the right. Fly the aircraft symbol into the cue, and keep it there, and you’ll follow the path.
What the Flight Director Looks Like
| Style | Appearance | Common in |
|---|---|---|
| Single cue (“V-bar”) | An inverted V that you nestle the aircraft symbol into | Many GA glass cockpits, including the Garmin G1000 |
| Dual cue (crosshairs) | A horizontal pitch bar and vertical roll bar; center the cross | Many airliners, including Boeing and Airbus types |
| Flight path director | Guidance relative to the flight path vector (“bird”) | Airbus TRK/FPA mode and some head-up displays |
Flight Director vs Autopilot
The two are closely linked but do different jobs:
- The flight director computes and displays guidance. Think of it as the brain giving directions.
- The autopilot physically moves the controls through servos. Think of it as the muscle.
In many systems, engaging the autopilot also turns on the flight director, and the autopilot flies the same commands shown on the display. You can also use the flight director with the autopilot off, hand-flying by following the cues. That’s common during takeoff and when hand-flying approaches. Some pilots also describe it as a useful aid during an autopilot problem, provided the FD’s own inputs are still reliable.
Flight Director Modes
The FD follows whichever modes are selected on the autopilot or mode control panel:
- Lateral: HDG (heading bug), NAV (GPS or VOR course), LOC (localizer), APR (approach)
- Vertical: ALT (hold altitude), VS (vertical speed), FLC or speed modes (climb or descend at a set airspeed), GS or GP (glideslope or glidepath)
- Takeoff/go-around: a pitch target for the initial climb
Always check the mode annunciator, the text strip showing active (often green) and armed (often white or cyan) modes. The FD is only as useful as the mode you’ve selected.
When Pilots Turn It Off
- Visual flying or raw-data practice. If you aren’t following the FD, its bars are a distraction, and following stale cues can lead you astray.
- Bar chasing. Over-correcting to keep the cues perfectly centered produces a jerky flight path. Smooth flying beats perfect centering.
- Wrong mode or wrong data. If the guidance doesn’t make sense, turn it off and fly the raw instruments.
Hand-flying without the FD keeps basic instrument skills sharp, which is why many pilots practise it regularly.
Using the Flight Director in a Simulator
- Garmin G1000 (Cessna 172, DA40, and others): press FD to show the magenta command bars without engaging the autopilot. Select HDG, NAV, or APR and hand-fly the cues. See Garmin G1000 basics in Microsoft Flight Simulator.
- Airbus A320: both FDs are normally on for takeoff, with guidance from modes like SRS and RWY. Our A320 flight director and autopilot tutorial walks through it.
- ILS practice: hand-fly an ILS with the FD in approach mode, then fly it again with raw needles only. Compare how stable each one was using ILS approach training in Microsoft Flight Simulator.