Learn to Fly

What does flight level 230 mean?

Flight level 230 means a pressure altitude of 23,000 feet with the altimeter set to 29.92 inHg. Learn how FL numbers work and how to fly FL230 in a sim.

On this page
  1. The Short Answer
  2. How Flight Level Numbers Work
  3. Is FL230 Exactly 23,000 Feet?
  4. Who Flies at FL230?
  5. Which Direction Uses FL230?
  6. Flying FL230 in Your Simulator

The Short Answer

Flight level 230 (FL230) means a pressure altitude of 23,000 feet: what the altimeter reads when it’s set to the standard pressure of 29.92 inches of mercury (1013.25 hPa). Controllers say it as “flight level two three zero.”

To convert any flight level to feet, multiply the number by 100. FL230 × 100 = 23,000 feet.

How Flight Level Numbers Work

Above the transition altitude, which is 18,000 feet in the United States and Canada and often much lower elsewhere, pilots stop using the local altimeter setting and set the standard 29.92 instead. Altitudes are then expressed as flight levels in hundreds of feet:

Flight level Pressure altitude
FL180 18,000 ft
FL230 23,000 ft
FL350 35,000 ft
FL410 41,000 ft

Everyone above the transition altitude uses the same setting, so aircraft at FL230 and FL240 stay 1,000 feet apart on their altimeters regardless of local weather. Our full guide to flight levels vs altitude explains the changeover in more detail.

Is FL230 Exactly 23,000 Feet?

Not necessarily above sea level. FL230 is a pressure altitude, not a true altitude:

  • in low pressure, an aircraft at FL230 is actually lower than 23,000 feet MSL
  • in high pressure, it’s actually higher
  • temperature also affects the difference, with colder-than-standard air putting you lower

For separation between aircraft that doesn’t matter, because they all shift together. Terrain clearance at those heights is rarely a concern outside the highest mountain ranges, and minimum altitudes on charts account for it. More on the reference itself: what is the definition of pressure altitude.

Who Flies at FL230?

FL230 sits in the middle of the range where you’ll find:

  • turboprops such as regional airliners and business turboprops, which often cruise in the low-to-mid 20,000s
  • jets on short routes, where climbing much higher isn’t worth it
  • jets climbing or descending that are stepped through the level by ATC

In the US, FL230 is inside Class A airspace, which runs from 18,000 feet MSL to FL600. Every flight there operates under instrument flight rules with an ATC clearance.

Which Direction Uses FL230?

FL230 is an odd flight level. Under the common semicircular rule, IFR aircraft on a magnetic course between 0° and 179°, roughly eastbound, use odd thousands such as FL190, FL210, and FL230. Westbound traffic, 180° to 359°, uses even levels such as FL220 and FL240. ATC can still assign other levels for traffic or airspace reasons, and some countries use different schemes.

Flying FL230 in Your Simulator

  1. Plan it. If you’re heading roughly east, FL230 is a valid cruise level. Enter it as the cruise altitude in your flight plan or FMS (often written as FL230 or 23000).
  2. Set standard pressure on the climb. Passing the transition altitude, set 29.92 or press STD. If you forget, your displayed altitude at “FL230” will be off by however far local pressure is from standard.
  3. Level off. Set 23,000 in the autopilot altitude selector. In airliners like the A320, the FCU displays it as FL230 once standard is set; see our A320 tutorial for MSFS.
  4. Descend correctly. Passing the transition level on the way down, set the destination’s local pressure.

On online networks, controllers will expect you to read back “flight level two three zero” and to be at the correct level with standard pressure set.

The complete guide to learn to fly

Learning to Fly with a Flight Simulator
Read the guide

Keep exploring

Guides from other topics

All topics →