Learn to Fly

What is the definition of pressure altitude?

Pressure altitude is your height above the standard datum plane, read with the altimeter set to 29.92 inHg. Here's how to calculate it and why pilots use it.

On this page
  1. The Definition
  2. The Standard Datum Plane
  3. Pressure Altitude vs True Altitude
  4. Pressure Altitude vs Density Altitude
  5. How to Calculate Pressure Altitude
  6. What Pilots Use It For
  7. Pressure Altitude in Your Flight Simulator

The Definition

Pressure altitude is the height above the standard datum plane, the theoretical level where atmospheric pressure equals 29.92 inches of mercury (1013.25 hPa). In practical terms, it’s the altitude your altimeter shows when you set it to 29.92 inHg.

It’s a standardized reference altitude. It doesn’t tell you exactly how high you are above the sea or the ground. It gives every pilot the same baseline for performance calculations and for flying flight levels at high altitude.

The Standard Datum Plane

The standard datum plane comes from the International Standard Atmosphere (ISA), a model of an “average” day: 29.92 inHg and 15°C at sea level, with temperature and pressure falling at set rates as you climb. Altimeters are calibrated to this model.

On a real day, sea-level pressure is rarely exactly 29.92. So the standard datum plane can sit above, at, or below actual sea level:

  • Low pressure day: the 29.92 level is below sea level, so pressure altitude is higher than true altitude.
  • High pressure day: the 29.92 level is above sea level, so pressure altitude is lower than true altitude.

Pressure Altitude vs True Altitude

True altitude is your actual height above mean sea level. With the correct local altimeter setting dialled in, your altimeter shows something close to true altitude. That’s why pilots use local settings at lower altitudes, where terrain and obstacles matter.

Local pressure Pressure altitude compared with true altitude
Exactly 29.92 inHg The same
Higher than 29.92 Lower
Lower than 29.92 Higher

Pressure Altitude vs Density Altitude

Density altitude is pressure altitude corrected for non-standard temperature. It’s the altitude the airplane “feels” it’s at, and it drives engine power, propeller efficiency, and lift. On a hot day, density altitude can be thousands of feet higher than pressure altitude, which means longer takeoff rolls and weaker climbs. Pressure altitude is the starting point for working it out.

How to Calculate Pressure Altitude

There are three common ways:

  1. Read it from the altimeter. Set 29.92 and read the altitude. This is the quickest in the cockpit or the sim.

  2. Use a rule of thumb. Pressure changes by roughly 1 inch of mercury per 1,000 feet near sea level, so:

    Pressure altitude ≈ (29.92 − altimeter setting) × 1,000 + field elevation

  3. Use a flight computer or app. E6B-style calculators do the math precisely.

Worked example: an airport at 1,500 feet elevation with an altimeter setting of 29.42 inHg.

  • 29.92 − 29.42 = 0.50
  • 0.50 × 1,000 = 500 feet
  • 500 + 1,500 = 2,000 feet pressure altitude

The rule of thumb is close enough for most planning. More precise formulas give a slightly different answer.

What Pilots Use It For

  • Performance charts. Takeoff distance, climb rate, and landing distance charts are built on pressure altitude and temperature.
  • Flight levels. Above the transition altitude, 18,000 feet in the US, every aircraft sets 29.92 and flies pressure altitudes labelled as flight levels. For example, flight level 230 is 23,000 feet of pressure altitude.
  • Transponder altitude reporting. A Mode C or Mode S transponder reports pressure altitude. ATC’s equipment applies the local setting to display an altitude, so what the controller sees doesn’t depend on what you’ve dialled into your own altimeter.
  • Density altitude. As above, it’s the first step.

Pressure Altitude in Your Flight Simulator

  • Read it directly. On the ground or in level flight, turn the baro knob to 29.92 (or press STD in many glass and airliner cockpits), note the reading, then set the local pressure back.
  • Use live weather. With real-world weather on, local pressure differs from standard, so you’ll see the difference between pressure altitude and indicated altitude on the panel.
  • Watch the reset. Forgetting to return to the local setting after checking 29.92 is a classic error that puts you at the wrong altitude near the ground. In the sim it only costs you a bad approach, but it’s a good habit to build.
  • Use it for planning. If you calculate takeoff performance for add-on aircraft, you’ll enter pressure altitude or an equivalent into the performance tool.

To see how pressure altitude fits with the other altitudes on your panel, read flight levels vs altitude and the six pack of flight instruments explained.

The complete guide to learn to fly

Learning to Fly with a Flight Simulator
Read the guide

Keep exploring

Guides from other topics

All topics →